Satelit Box
Everything Satelit knows, out loud.
From 2,990 MDL. Target price.Designed in Moldova. In development.
Tell me at preorderOne rhombus. One line of light.
- From the front, its outline is a rhombus.
- No screws in sight.
- It prints with no support.
-
The line of light
-
On top, one touch
-
A mesh you can change
You ask. It answers.
How much is diesel today?
At TLX, 35.89 MDL a litre.today
What is a euro worth?
20.09 MDL, the BNM rate.today
Where is milk cheapest?
At Linella, 14.49 MDL.today
What should I cook tonight?
Vegetable soup with noodles, 2.86 MDL a serving.today
- Put eggs and butter on the list.
- How much did we spend on food this month?
- I paid 340 MDL at Linella.
- A gazebo with a grill near Chișinău?
- What flights go to Milan tomorrow?
- Any new law today?
- Set a 10 minute timer.
- Tell a story for the kids.
It remembers you.
-
Remembers what you tell it
Written, in testing -
Knows who likes what
Written, in testing -
Recognises your voice
Planned. Only if you want it. -
Fills your cart
In Satelit today -
Calls your friends
In the app today. By voice, planned -
It may find you the one
Closed test. Adults only. On the phone.
Your music. From any app.
- Bluetooth from day one
- Internet from day one
- Direct after certification
- Spotify
- Apple Music
- YouTube Music
- Yandex Music
- Tidal
- Qobuz
- Deezer
- Amazon Music
Over Bluetooth, from your own app. Trademarks belong to their owners.
They know the world. It knows Moldova.
The dash means it does not appear on their official pages, read on 2 November 2026. Trademarks belong to their owners.
Part by part.
-
All the parts
- 160 x 158 x 244 mm
- ≈ 506 g of plastic
- ≈ 25 hours of printing
-
Lower half
- Printed waist down
- No supports
-
The driver
- 3 inch, 4 Ω, 20 W
- Foam gasket
-
The foot
- Twists 20°
- The ring holds the driver
- No tools
-
The radiator
- The panel slides 8 mm
- A ramp presses it on
-
The line of light
- LED strip in the front ridge
- Natural PETG
-
The brain
- ESP32-S3 and ESP32, external antenna
- DAC and amplifier
- Slides in on rails
-
Upper half
- O-ring in its groove
- Twists 30°
- Rhombi aligned means closed
-
Mesh and top
- Two mesh halves, from the sides
- They click, no magnets
- RP-SMA at the back
-
The modules
- 4 magnets, 6 contacts
- They stack
- No tools
-
Done
You say “Satelit”. The line lights up. It answers.
Take it apart. Right here.
Make it what you need.
Just the body. Mains power, over USB-C.
Three meshes to choose from
Carpet
Lines
Honeycomb
The six accessories
- Battery plinth ≈ 154 g · ≈ 8 hours Battery plinthPlinth base
-
Handle ≈ 114 g · ≈ 6 hours Handle: plateHandle: armsHandle: arch - Phone dock ≈ 106 g · ≈ 5 hours Dock platePhone dock
-
Sensors and Zigbee ≈ 78 g · ≈ 4 hours Sensors: boxSensors: base - Wall shelf ≈ 90 g · ≈ 5 hours Wall shelf
-
Bass+ ≈ 286 g · ≈ 14 hours Bass+: bodyBass+: footBass+: panel
Print the box yourself. Free.
Download all parts · 1 MBNot printed yet. The first test print comes next.
How to print and what else you need
How to print
- PETG. PLA softens near the amplifier.
- 0.4 mm nozzle, 0.2 mm layers.
- 4 walls, 15 % infill.
- The line: natural, translucent PETG.
- The orientation is in the file.
What is not printed
- Ø10 x 3 mm magnets, a 50-pack
- 6-pin pogo contacts, 5 pairs
- 100 x 3 mm O-ring
- Steel weights, 160 g
- 144/m LED strip, gasket foam
- The electronics: a kit, or the list in the plan
Every part is checked automatically: closed solid, fits the bed, no collisions. Not printed yet. Grams and hours are estimates.
The plinth is only the case. Li-ion cells take experience: a badly built pack can catch fire.
Proposed licence: CC BY-NC-SA 4.0. Print and change them freely. Do not sell them.
All 27 parts
| Part | Size, mm | Plastic | |
|---|---|---|---|
| Lower half 181 KB | 160 x 155 x 94 | ≈ 168 g | ≈ 8 h |
| Upper half 140 KB | 160 x 155 x 117 | ≈ 193 g | ≈ 10 h |
| Top plate 8 KB | 51 x 72 x 2 | ≈ 5 g | ≈ 0.3 h |
| Light line, lower 3 KB | 14 x 82 x 8 | ≈ 4 g | ≈ 0.2 h |
| Light line, upper 1 KB | 14 x 122 x 7 | ≈ 7 g | ≈ 0.3 h |
| Foot 85 KB | 136 x 141 x 15 | ≈ 53 g | ≈ 3 h |
| Foot lid 31 KB | 104 x 116 x 26 | ≈ 30 g | ≈ 2 h |
| Mesh: Carpet 587 KB | 134 x 129 x 25 | ≈ 16 g | ≈ 0.8 h |
| Mesh: Lines 165 KB | 134 x 129 x 25 | ≈ 15 g | ≈ 0.7 h |
| Mesh: Honeycomb 462 KB | 134 x 129 x 25 | ≈ 12 g | ≈ 0.6 h |
| Driver ring 58 KB | 79 x 90 x 34 | ≈ 9 g | ≈ 0.4 h |
| Board sled 36 KB | 56 x 78 x 10 | ≈ 11 g | ≈ 0.5 h |
| Back panel 1174 KB | 94 x 90 x 7 | ≈ 22 g | ≈ 1 h |
| Antenna cover 37 KB | 26 x 61 x 2 | ≈ 4 g | ≈ 0.2 h |
| Battery plinth 84 KB | 152 x 153 x 60 | ≈ 109 g | ≈ 6 h |
| Plinth base 89 KB | 144 x 144 x 14 | ≈ 45 g | ≈ 2 h |
| Bass+: body 180 KB | 152 x 153 x 102 | ≈ 195 g | ≈ 10 h |
| Bass+: foot 68 KB | 156 x 174 x 15 | ≈ 70 g | ≈ 4 h |
| Bass+: panel 827 KB | 82 x 82 x 8 | ≈ 21 g | ≈ 1 h |
| Sensors: box 105 KB | 138 x 143 x 14 | ≈ 44 g | ≈ 2 h |
| Sensors: base 60 KB | 130 x 134 x 9 | ≈ 34 g | ≈ 2 h |
| Dock plate 29 KB | 138 x 143 x 6 | ≈ 49 g | ≈ 2 h |
| Phone dock 6 KB | 115 x 50 x 89 | ≈ 57 g | ≈ 3 h |
| Wall shelf 48 KB | 138 x 176 x 56 | ≈ 90 g | ≈ 5 h |
| Handle: plate 34 KB | 143 x 143 x 6 | ≈ 47 g | ≈ 2 h |
| Handle: arms 4 KB | 26 x 127 x 24 | ≈ 15 g | ≈ 0.8 h |
| Handle: arch 6 KB | 176 x 172 x 24 | ≈ 52 g | ≈ 3 h |
Your peace of mind
- A switch cuts power to the microphones.
- The line lights up when it listens.
- Audio is not kept.
- It never pays by voice.
Three ways to have it
Target prices, with VAT.
-
The files
0 MDL
The case and 6 accessories, as STL. You source the electronics.
Download -
Electronics kit
2,190 – 2,490 MDL
You print the case.
-
Satelit BoxRecommended
2,990 – 3,390 MDL
Printed, assembled, tested.
-
Complete
4,490 – 4,990 MDL
It leaves the socket.
Each comes with 3 months of the Family plan. With no plan, it stays a Bluetooth speaker.
- Yandex Station Lite 22,059
- Electronics kit2,190
- Satelit Box2,990
- JBL Charge 62,999
- Apple HomePod mini3,299
- Marshall Emberton III4,099
- Complete4,490
- Amazon Echo Show 84,779
Prices from Satelit, 2 November 2026.
In development. The images are renders. We take no money now.
Where we are
- Software and model
- Two prototypes
- Sound
- Our own board
- Certification
- Preorder
Be first to know.
One email, when the preorder opens.
Questions
When does the preorder start?
Once the prototypes work and certification is clear. We will not give a date we cannot keep. Leave your address and we will write.
How much does Satelit Box cost?
The print files are free. The target for the electronics kit is 2,190–2,490 MDL, for the assembled box 2,990–3,390 MDL.
Can I print it myself?
Yes. Every part downloads with no account and fits a 180 mm bed. We recommend PETG. Not printed yet: the first test print comes next.
How does it go together?
No tools. The halves twist together, the mesh clicks in, accessories attach with magnets.
Can I fit my own antenna?
Yes. Take off the back cover and screw another 2.4 GHz antenna onto the RP-SMA. Radio approval covers only the antennas tested, and the EU limit is 20 dBm.
Does it work with Spotify, YouTube Music or Yandex Music?
Yes, over Bluetooth, from the app on your phone, from day one. Direct connection with no phone needs certification and agreements we do not have yet. YouTube Music and Yandex Music stay on Bluetooth for now.
Does it need a subscription?
As a Bluetooth speaker, no. The voice assistant uses Satelit plans. Each box comes with 3 months of the Family plan.
Is it always listening?
Only wake word recognition runs on the box. Nothing leaves before it. The switch on the back cuts power to the microphones. Audio is not kept. The text of requests stays 30 days and you can delete it.
Does it do everything the Satelit app does?
Everything that can be said out loud: prices, lists, spending, recipes, flights, laws, rates, fuel. Barcode cards and encrypted messages stay on the phone.