Switch L3/ Router Cisco Catalyst (WS-C6509E) (VS-S2T-10G-XL) - https://myserver.md/produs/switch-l3-router-cisco-catalyst-ws-c6509e-vs-s2t-10g-xl

Switch show version Cisco IOS Software, s2t54 Software (s2t54-ADVENTERPRISEK9-M), Version 15.5(1)SY4, RELEASE SOFTWARE (fc4) Copyright (c) 1986-2019 by Cisco Systems, Inc. Compiled Mon 02-Sep-19 07:17 by prod_rel_team

ROM: System Bootstrap, Version 12.2(50r)SYS3, RELEASE SOFTWARE (fc1)

Switch Uptime: is 29 weeks, 2 days, 9 hours, 14 minutes Uptime for this control processor is 29 weeks, 2 days, 9 hours, 13 minutes System returned to ROM by reload at 07:29:41 Chisina Thu Jun 29 2023 System restarted at 07:31:15 Chisinau Thu Jun 29 2023 System image file is "bootdisk:s2t54-adventerprisek9-mz.SPA.155-1.SY4.bin" Last reload reason: Reload Command

Processor board ID: SMG0932NALS Cisco WS-C6509-E (M8572) processor (revision ) with 3162112K/524288K bytes of memory.

CPU: MPC8572_E, Version: 2.2, (0x80E80022) CORE: E500, Version: 3.0, (0x80210030) CPU:1500MHz, CCB:600MHz, DDR:600MHz L1: D-cache 32 kB enabled; I-cache 32 kB enabled.

Last reset from s/w reset 41 Virtual Ethernet interfaces 75 Gigabit Ethernet interfaces 18 Ten Gigabit Ethernet interfaces 2543K bytes of non-volatile configuration memory.

Configuration register: is 0x2102 Switch show platform hardware cef maximum-routes. Fib-size: 1024k (1048576);

Shared-size: 0k (0);

Shared-usage: 0k(0).

Protocol Max-routes Use-shared-region Dedicated -------- ---------- ----------------- --------- IPV4 951 k Yes 951k IPV4-MCAST 1 k No 1k IPV6 64 k No 64k IPV6-MCAST 4 k No 4k MPLS 1 k No 1k EoMPLS 1 k No 1k VPLS-IPV4-MCAST 1 k Yes 1k VPLS-IPV6-MCAST 1 k Yes 1k

Switch show platform hardware capacity forwarding.

L2 Forwarding Resources: MAC Table usage Module Collisions Total Used Used % --------------- ------ ---------- ---------- ------ 5 0 131072 7 1%

L3 Forwarding Resources: FIB TCAM usage Total Used Used %

-------------- ----- ---- ------

72 bits(IPv4, MPLS, EoM) 1048576 46 1% 144 bits(IP mcast, IPv6) 524288 18 1% 288 bits(IPv6 mcast) 262144 1 1%

Detail:

Protocol Used Used %

-------- ---- ----- IPv4 44 1% MPLS 1 1% EoM 1 1% IPv6 6 1% IPv4 mcast 12 1% IPv6 mcast 1 1%

Adjacency usage:

Total Used Used %

----- ----- ------ 1048576 32012 3%

Forwarding engine load:

Module Pps Peak-pps Peak-time

------ --- -------- ----------------------------- 5 6 5249466 16:52:46 Chisinau Oct 21 2023

Switch show power: system power redundancy mode = combined system power total = 4618.32 Watts (109.96 Amps @ 42V) system power used = 2065.56 Watts (49.18 Amps @ 42V) system power available = 2552.76 Watts (60.78 Amps @ 42V) Power-Capacity PS-Fan Output Oper PS Type Watts A @42V Status Status State -- ------------ ----- ------ ------ ------ ----- 1 WS-CAC-3000W 2771.16 65.98 OK OK ON 2 WS-CAC-3000W 2771.16 65.98 OK OK ON Pwr-Allocated Oper Fan Type Watts A @42V State --- -------------- ----- ------ ----- 1 WS-C6509-E-FAN 210.00 5.00 OK

Pwr-Requested Pwr-Allocated Admin Oper Slot Card-Type Watts A @42V Watts A @42V State State ---- --------------- ------- ------ ------- ------ ------ ----- 1 WS-X6748-GE-TX 325.50 7.75 325.50 7.75 ON ON 3 WS-X6724-SFP 125.16 2.98 125.16 2.98 ON ON 5 VS-SUP2T-10G 450.66 10.73 450.66 10.73 ON ON 6 WS-X6716-10GE 503.58 11.99 503.58 11.99 ON ON system auxiliary power mode = off system auxiliary power redundancy operationally = non-redundant system primary connector power limit = 10920.00 Watts (260.00 Amps @ 42V) system auxiliary connector power limit = 10500.00 Watts (250.00 Amps @ 42V) system primary power used = 2065.56 Watts (49.18 Amps @ 42V) system auxiliary power used = 0 Watt

Switch show module: Mod Ports Card Type Model Serial Nr. --- ----- ----------------- -------------------------------- --------------------------- 1 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL1105FT1N 3 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL1108HT4U 5 5 Supervisor Engine 2T 10GE w/ CTS Acti VS-SUP2T-10G SAL1940QGSP 7 16 CEF720 16 port 10GE WS-X6716-10GE SAL1444Y3BP

Mod MAC addresses Hw Fw Sw Status --- -------------------------------- ------ ----------- ---------- ------ 1 001a.a257.dfc0 to 001a.a257.dfef 2.5 12.2(18r)S1 15.5(1)SY4 Ok 3 001a.6c68.9fe8 to 001a.6c68.9fff 2.5 12.2(18r)S1 15.5(1)SY4 Ok 5 d072.dcbb.e20d to d072.dcbb.e214 2.1 12.2(50r)SYS 15.5(1)SY4 Ok 7 f866.f220.7bf0 to f866.f220.7bff 1.2 12.2(18r)S1 15.5(1)SY4 Ok

Mod Sub-Module Model Serial Hw Status --- --------------------------- ---------------- ------------ ---- ------ 1 Centralized Forwarding Card WS-F6700-CFC SAL1101CZ5N 2.1 Ok 3 Centralized Forwarding Card WS-F6700-CFC SAL1134YC2Z 4.0 Ok 5 Policy Feature Card 4 VS-F6K-PFC4XL SAL1938PE6B 3.0 Ok 5 CPU Daughterboard VS-F6K-MSFC5 SAL1940Q8XF 3.0 Ok 7 Distributed Forwarding Card WS-F6K-DFC4-EXL SAL1926HMWH 1.2 Ok

*Jan 20 12:43:33.795: %PFREDUN-6-ACTIVE: Initializing as ACTIVE Processor for this switch *Jan 20 12:43:54.175: SP: Currently running ROMMON from S (Gold) region *Jan 20 12:44:04.183: %SYS-5-RESTART: System restarted -- Cisco IOS Software, s2t54 Software (s2t54-ADVENTERPRISEK9-M), Version 15.5(1)SY4, RELEASE SOFTWARE (fc4) Copyright (c) 1986-2019 by Cisco Systems, Inc. Compiled Mon 02-Sep-19 07:17 by prod_rel_team *Jan 20 12:44:05.783: %SYS-6-BOOTTIME: Time taken to reboot after reload = 143 seconds *Jan 20 12:44:07.607: %OIR-6-INSPS: Power supply inserted in slot 1 *Jan 20 12:44:08.111: %C6KPWR-4-PSOK: power supply 1 turned on. *Jan 20 12:44:08.655: %OIR-6-INSPS: Power supply inserted in slot 2 *Jan 20 12:44:08.655: %C6KPWR-4-PSOK: power supply 2 turned on. *Jan 20 12:44:08.655: %C6KPWR-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system is operating on both power supplies. *Jan 20 12:44:09.759: %C6KENV-4-FANHPMODE: Fan-tray 1 is operating in high power mode *Jan 20 12:44:16.771: %FABRIC-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 5 became active. *Jan 20 12:44:21.555: %DIAG-6-RUN_MINIMUM: Module 5: Running Minimal

Diagnostics... *Jan 20 12:44:44.371: %DIAG-6-DIAG_OK: Module 5: Passed Online Diagnostics *Jan 20 12:44:44.479: %C6KENV-4-ADJACENT_SLOTS_EMPTY: Two adjacent slots of module 5 might be empty. Airdams must be installed in these slots to be NEBS compliant *Jan 20 12:44:49.215: %OIR-6-SP_INSCARD: Card inserted in slot 5, interfaces are now online *Mar 1 00:00:02.795: Daughte rBoard (Centralized Forwarding Card).

Firmware compiled 02-Sep-19 06:53 by binugopa Build [25600] Jan 20 12:45:21.167: %SYS-CFC1-5-RESTART: System restarted -- Cisco IOS Software, c6lc2e8 Software (c6lc2e8-SP-M), Version 15.5(1)SY4, RELEASE SOFTWARE (fc4) Copyright (c) 1986-2019 by Cisco Systems, Inc. Compiled Mon 02-Sep-19 06:53 by prod_rel_team *Jan 20 12:45:28.283: %DIAG-6-RUN_MINIMUM: Module 1: Running Minimal

Diagnostics... Jan 20 12:45:21.171: CFC1: Currently running ROMMON from F1 region *Jan 20 12:45:40.887: %DIAG-6-DIAG_OK: Module 1: Passed Online Diagnostics *Jan 20 12:45:41.151: %OIR-6-SP_INSCARD: Card inserted in slot 1, interfaces are now online *Jan 20 12:47:23.775: %PNP-6-PNP_DISCOVERY_STOPPED: PnP Discovery stopped (Config Wizard)